Brown® T-Series LS | LS Elite

Horizontal Trim Presses

SERVO-DRIVEN TO OPTIMIZE YOUR AUTOMATION AND QUICK-CHANGE NEEDS

Brown LS trim press sets the industry standard for speed, accuracy and flexibility. Properly equipped, the LS press will consistently run at speeds of up to 165 CPM. In addition to speed, the servo-driven LS press is configured to slow down to eject and speed up to sync with the cycle time of the thermoformer. This functionality is necessary to incorporate downstream automation and maximize your output. With the quick-change tool mode and drop-away arm features on the Elite Series, changeovers are easily achieved and can be made in 30 minutes or less. Speed, flexibility and automation compatibility all add up to the highest performing trim press on the market.

Partner the LS-Series trim press, Quad Series former, NAS automation and tooling from Brown Machine Group for an unparalleled, integrated turnkey solution.

  • Controls – Allen-Bradley HMI and PLC control with Yaskawa motion control
  • Linear Bearings and Deeper Moving Platen – virtually zero deflection at full tonnage, greater stiffness nearly eliminates tilt in
    off-center trim tool load conditions
  • Drop-Away Arm – ultimate quick-change in 30 minutes or less, provides clearance for trim assembly maintenance without having to remove the trim tooling
  • Servo Drive and Fly Wheel – achieve greater speeds
  • Quick-Change Tool Packages
  • Tool Carts & Die Set Roller/Elevator Systems
  • EZ-Adjust Stroke (Patented)
  • Fine Adjust Connecting Arms (Patented)
  • “Drop-Away” Connecting Arm Release (Patented)
  • “Neutral Link” Linear Guided Counterbalance (Patented)
  • Treadle Lift System
  • Servo-Actuated Treadle System
  • Quick-Change Feed & Canopy Guides
  • Servo Ejector with Count/Eject Capabilities
  • Product Handler Interface
  • Trim Press & Tool Monitoring
  • Overhead Mezzanine
  • 65 Kilo Amp Short Circuit Rating
  • UL, CE, CSA & HSE Approvals
  • International Voltages Available
T-330LS T-350LS T-454LS T-564LS
Maximum Trim Tonnage 30 tons 267 kn 30 tons 267 kn 40 tons 357 kn 50 tons 446 kn
Operating Speeds Up to 165 spm Up to 165 spm Up to 165 spm Up to 165 spm
Minimum Adjustable Stroke 4.5" 114 mm 4.5" 114 mm 4.5" 114 mm 4.5" 114 mm
Maximum Adjustable Stroke 13.5" 343mm 13.5" 343mm 13.5" 343mm 13.5" 343mm
Stationary Platen Opening* Width x Length 12.50” x 30” 318mm x 762mm 16.25” x 54” 413mm x 1372mm 16.25” x 58” 413mm x 1473mm 20” x 68” 508mm x 1727mm
16.25” X 30” 413mm x 762mm 20” X 54”  508mm x 1372mm 20” X 58” 508mm x 1473mm 16.25” X 68” 508mm x 1727mm
Maximum Sheet Width 35" 889mm 55" 1397mm 59" 1499mm 69" 1753mm
Air Consumption @ 80 psi† .01 scf Maximum per cycle .01 scf Maximum per cycle .01 scf Maximum per cycle .01 scf Maximum per cycle
Quick Tool Change Frame (Side Load) Standard Standard Standard Standard
Elite Series Option Drop-Away Connecting Arms, Treadle Lift System, Automated Changeover Control Position Drop-Away Connecting Arms, Treadle Lift System, Automated Changeover Control Position Drop-Away Connecting Arms, Treadle Lift System, Automated Changeover Control Position Drop-Away Connecting Arms, Treadle Lift System, Automated Changeover Control Position
*Deep draw configurations available
†Air consumption does not include tooling functions