Thermoforming
Brown® SRS-Series
Thermoformers
The SRS-Series is a servo-driven thermoformer and trim station in one frame that is perfect for point-of-purchase blister packs, medical trays and food packaging. The servo-drive systems for both form and trim stations act independently but work together so the SRS can be quickly dialed in to ...
Brown® SV-Series
Vacuum Shuttle Thermoformers
Brown offers the most advanced and reliable multi-station shuttle equipment on the market ideal for shorter runs and frequent changeovers. The SV-Series is ideal for large products made with heavy gauge materials. The shuttle car indexes material through the process by loading, heating, ...
Brown® SP-Series
Pressure Shuttle Thermoformers
Shuttle systems are an excellent choice for forming large products with heavy-gauge materials, ideal for shorter runs and frequent changeovers. The Brown SP-Series adds pressure to the shuttle vacuum process giving you the ability to achieve greater product detail. In addition to the variety ...
Brown® T-Series L | LP | LDP
Horizontal Trim Presses
T-Series Horizontal Trim Press is the industry standard multipurpose press equipped with a multitude of cutting edge features to achieve precise trimming, longer tool life, ease of maintenance and faster changeover times. T-Series Models incorporate precision timed flywheels to the main drive ...
Brown® PH-SERIES
Pre-Heater Oven
Pre-Heater Ovens allow material to expand naturally prior to entering the pin chain of the thermoformer, eliminating distortion within the sheet and reducing sag. Our Pre-Heater Ovens are designed to utilize minimal floor space when positioned at the infeed end of the thermoformer and are ...
Lyle® FM-Series
Thermoformers
The FM-Series offers high speed, economical and reliable performance with an infinite array of options for a variety of forming applications. Two moving platens (top and bottom) guided on precision linear bearings allow parts to be formed up or down as required, optimizing material ...
Lyle® P2-Series
Horizontal Trim Presses
The P2-Series horizontal trim press offers high-speed trim operations and a multitude of features to achieve trim accuracy, extended tool life and ease of maintenance. This versatile trim press is used to trim a wide variety of parts, from shallow to deep draw and from virtually any plastic ...
BROWN® RV-SERIES
Vacuum Rotary Thermoformers
Brown offers the most advanced and reliable multi-station rotary equipment on the market. The R-Series is ideal for large products made with heavy gauge materials. The rotary system achieves higher production output by loading, heating, forming and unloading simultaneously. Brown provides the ...
BROWN® RP-SERIES
Pressure Rotary Thermoformers
Rotary systems are an excellent choice for forming large products with heavy-gauge materials for high-production needs. The Brown RP-Series adds pressure to the rotary vacuum process giving you the ability to achieve greater product detail. In addition to the variety of standard vacuum forming ...
BROWN® CS-SERIES
Thermoformers
Brown’s CS-Series thermoformer is a fast, flexible, entry-level workhorse that is easily capable of running a multitude of products and materials. The CS can be configured with basic standard features, or with an infinite array of options including deep or shallow draw, making it a perfect fit ...
BROWN® CS QUAD-SERIES
Thermoformers
Brown’s Quad Series thermoformer is the ultimate in brute-strength and production output. The Quad Series combines high-tonnage coining technology with traditional thermoforming processes to produce highly-detailed parts. It delivers 180 tons of coining force and 260 tons of holding force, so ...
Brown® B-Series
Thermoformers
The B-Series is a pellet-to-product thermoforming system designed to produce hundreds of thousands of parts per hour while saving energy and operating costs at the same time.
The direct extrusion Brown B-Series hot-sheet thermoformer offers many advantages over traditional ...
Brown® VersaForm
Thermoformers
VersaForm is a precision, high-speed continuous thermoforming machine in a compact and powerful package developed for the international thermoforming industry. Available in two models, the FT (Form/Trim) and FTS (Form/Trim/Stack), with a mold area scaled for the demands of the global ...
Brown® T-Series LS | LS Elite
Horizontal Trim Presses
Brown LS trim press sets the industry standard for speed, accuracy and flexibility. Properly equipped, the LS press will consistently run at speeds of up to 165 CPM. In addition to speed, the servo-driven LS press is configured to slow down to eject and speed up to sync with the cycle time of ...
Brown® V-Series V | VP Models
Vertical Trim Presses
The Brown V and VP model trim presses are vertical acting, matched metal punch and die presses. Servo systems control the main drive, feed system, treadle motion, ejector and product lift table which results in high-speed, precise trimming, accurate counting and integrated product handling. ...
BROWN® LR SERIES
Lip Rollers
Brown offers lip rollers for product diameters ranging from 1.75 inches (44mm) up to 11 inches (280mm) which operate at peak speeds up to 3,500 parts per minute. So, no matter what your application, we have a solution for you. As you expect from Brown, our lip rollers are designed to safely ...
Lyle® FMT-Series
Thermoformers
The FMT-Series offers versatility and performance with rugged, reliable thermoform and trim capabilities in one frame ideal for point-of-purchase blister packs, medical trays and food packaging. Powerful and precise servo platen drives, roll unwind, oven, form station, steel-rule die trim ...
Lyle® 200-Series
Thermoformers
The Lyle 200-Series is the industry standard for forming CPET products that require a high tonnage two-stage forming process. The dual stage valve package provides independent control of the two-stage forming process and can be configured through the PLC to operate in conventional mode for ...
Lyle® PV | PVT-Series
Vertical Trim Presses
The PV and PVT-Series vertical trim press is a versatile machine that can be used for pre-punching, scoring, or final trim applications. The vertical set-up is perfect for parts that don’t stack as well horizontally, and provides the added benefit of accurate counting and product handling. The ...
Lyle® LabForm
Prototyping Thermoformers
The LabForm is ideal for evaluating the form, fit and function of your products prior to tool production, as well as producing samples for market tests. The high pressure and vacuum forming process allows you to obtain desired distribution characteristics replicating your full-scale production ...
Brown®
Sheet CutOff System
The addition of a cutoff system eliminates the need for operators to physically hand-cut sheet material with a knife, which promotes operator safety. In addition to safety, the system produces a straight cut, so startup is faster when introducing sheet to the infeed of your trim press. The ...
Brown®
Smart Control
Smart Control is Brown’s integrated intelligence control software which enables the machine to monitor system performance, notify operators of out-of-range operation, automatically makes critical machine adjustments, and communicate preventative maintenance needs.
Brown®
AL90 Four-Way Adjustable Clamp Frame System
This new leading edge, fast, light weight clamp frame system gives you all the latest in four-way adjustable clamp frame technology. The AL90 has the ability to move a short section, as small as 6” to an inventory position without removing it from the frame section, eliminating the need for ...
Brown®
Electric Rotate and Shot Pin System
Upgrade existing Brown Rotary Thermoformers with “Push” or “Push/Pull” Rotate Systems to the “state of the art” smooth and positive Electric Gear Rotate System. Successfully installed in applications with 18′ to 50′ wheel diameters and generating rotate speeds as low as 4 seconds, ...
Brown®
Oven Door Safety System
This fire protection system is available for retrofit on all Brown ovens and can also be retrofit to many other brands of single-station cut sheet machinery.
Located in the bottom ovens, the system incorporates Teflon® sheet curtains to help reduce the chance of oven damage or an ...
Brown®
Servo Ejector
The Brown Servo Ejector Unit provides more production flexibility for thermoformers. Changes can be made to the ejection parameters through the HMI on the fly without having to shut the machine down, and product trimming can function in three different modes of operation.
The unit ...
