Skip to content
Acquisition

Thermoforming Machines

Refine Selection
By Brand
By Type

BROWN® CS QUAD-SERIES

Thermoformers

Brown’s Quad Series thermoformer is the ultimate in brute-strength and production output. The Quad Series combines high-tonnage coining technology with traditional thermoforming processes to produce highly-detailed parts. It delivers 180 tons of coining force and 260 tons of holding force, so ...

Learn More

BROWN® CS-SERIES

Thermoformers

Brown’s CS-Series thermoformer is a fast, flexible, entry-level workhorse that is easily capable of running a multitude of products and materials. The CS can be configured with basic standard features, or with an infinite array of options including deep or shallow draw, making it a perfect fit ...

Learn More

Brown® B-Series

Thermoformers

The B-Series is a pellet-to-product thermoforming system designed to produce hundreds of thousands of parts per hour while saving energy and operating costs at the same time.

The direct extrusion Brown B-Series hot-sheet thermoformer offers many advantages over traditional ...

Learn More

Brown® SRS-Series

Thermoformers

The SRS-Series is a servo-driven thermoformer and trim station in one frame that is perfect for point-of-purchase blister packs, medical trays and food packaging. The servo-drive systems for both form and trim stations act independently but work together so the SRS can be quickly dialed in to ...

Learn More

Lyle® FM-Series

Thermoformers

The FM-Series offers high speed, economical and reliable performance with an infinite array of options for a variety of forming applications. Two moving platens (top and bottom) guided on precision linear bearings allow parts to be formed up or down as required, optimizing material ...

Learn More

Lyle® 200-Series

Thermoformers

The Lyle 200-Series is the industry standard for forming CPET products that require a high tonnage two-stage forming process. The dual stage valve package provides independent control of the two-stage forming process and can be configured through the PLC to operate in conventional mode for ...

Learn More

Brown® T-Series LS | LS Elite

Horizontal Trim Presses

Brown LS trim press sets the industry standard for speed, accuracy and flexibility. Properly equipped, the LS press will consistently run at speeds of up to 165 CPM. In addition to speed, the servo-driven LS press is configured to slow down to eject and speed up to sync with the cycle time of ...

Learn More

Brown® T-Series L | LP | LDP

Horizontal Trim Presses

T-Series Horizontal Trim Press is the industry standard multipurpose press equipped with a multitude of cutting edge features to achieve precise trimming, longer tool life, ease of maintenance and faster changeover times. T-Series Models incorporate precision timed flywheels to the main drive ...

Learn More

Brown® V-Series V | VP Models

Vertical Trim Presses

The Brown V and VP model trim presses are vertical acting, matched metal punch and die presses. Servo systems control the main drive, feed system, treadle motion, ejector and product lift table which results in high-speed, precise trimming, accurate counting and integrated product handling. ...

Learn More

Lyle® P2-Series

Horizontal Trim Presses

The P2-Series horizontal trim press offers high-speed trim operations and a multitude of features to achieve trim accuracy, extended tool life and ease of maintenance. This versatile trim press is used to trim a wide variety of parts, from shallow to deep draw and from virtually any plastic ...

Learn More

Lyle® PV | PVT-Series

Vertical Trim Presses

The PV and PVT-Series vertical trim press is a versatile machine that can be used for pre-punching, scoring, or final trim applications. The vertical set-up is perfect for parts that don’t stack as well horizontally, and provides the added benefit of accurate counting and product handling. The ...

Learn More

BROWN® LR SERIES

Lip Rollers

Brown offers lip rollers for product diameters ranging from 1.75 inches (44mm) up to 11 inches (280mm) which operate at peak speeds up to 3,500 parts per minute. So, no matter what your application, we have a solution for you. As you expect from Brown, our lip rollers are designed to safely ...

Learn More

Brown® PH-SERIES

Pre-Heater Oven

Pre-Heater Ovens allow material to expand naturally prior to entering the pin chain of the thermoformer, eliminating distortion within the sheet and reducing sag. Our Pre-Heater Ovens are designed to utilize minimal floor space when positioned at the infeed end of the thermoformer and are ...

Learn More

Brown®

Sheet CutOff System

The addition of a cutoff system eliminates the need for operators to physically hand-cut sheet material with a knife, which promotes operator safety. In addition to safety, the system produces a straight cut, so startup is faster when introducing sheet to the infeed of your trim press. The Brown cutoff system can be located at either end of any brand of thermoformer, and can be integrated as an option on new equipment or purchased as a stand-alone machine. As with all Brown equipment, the cutoff system is designed to run with the greatest efficiency, and built to provide you years of service.

The addition of a cutoff system eliminates the need for operators to physically hand-cut sheet material with a knife, which promotes operator safety. In addition to safety, the system produces a straight cut, so startup is faster when introducing sheet to the infeed of your trim press. The ...

Download Spec Sheet
Brown Machine Group Lyle Informer

Lyle®

Informer™
Download Spec Sheet

Brown®

Servo Ejector

The Brown Servo Ejector Unit provides more production flexibility for thermoformers. Changes can be made to the ejection parameters through the HMI on the fly without having to shut the machine down, and product trimming can function in three different modes of operation.

The unit allows you to:

  • Short eject product on every stroke to remove the product from the trim die, or
  • Short eject product on every stroke with an additional swing through long ejection for counter capabilities, or
  • Swing through long eject product only for high speed applications with counter capabilities.

Parameter changes for acceleration, deceleration and ejection length are made at the operator interface. The long stroke method allows the machine to eject parts in stacks of a preset quantity, eliminating the need for a separate handling operation. Two platen-mounted linear bearing assemblies guide the unit for smooth actuation. Segen cylinders are available within the ejector platen to facilitate quick change.

The Brown Servo Ejector Unit provides more production flexibility for thermoformers. Changes can be made to the ejection parameters through the HMI on the fly without having to shut the machine down, and product trimming can function in three different modes of operation.

The unit ...